UPS APC Smart-UPS C 3000VA LCD

Type: UPS Interactive (line-interactive) Purpose: For home, for computer Output Power: - Volt-amperes: 3000 VA - Watts: 2100 W Input Network Parameters: - Nominal Voltage: 230 V - Minimum Voltage (for operation from 220V network): 180 V - Maximum Voltage (for operation from 220V network): 287 V - Frequency: 50/60 Hz - Frequency Deviation Range: ± 6% Output Parameters: - Nominal Voltage: 230 V (Output voltage distortion less than 5% at full load) - Frequency: 50 Hz - Efficiency at Full Load: 97.7% Battery Parameters: - Charging Time: 3 hours - Backup Time at Max Load: 5.8 min - Additional Battery Connection Capability: + Filtering and Protection: - Surge Suppression: 300 J - Overload Protection: + - Overvoltage Protection: + - Deep Discharge Protection for Batteries: + Connectors: - PC Connection Interface: USB - Input Connectors: (1) IEC-320 C14 - Output Connectors: (6) IEC 320 C13, (1) IEC 320 C19 Physical Characteristics: - Width: 197 mm - Height: 435 mm - Depth: 544 mm - Weight: 43 kg Additional Characteristics: - Heat Dissipation in Network Mode: 135.00 BTU/hr - Battery Type: Maintenance-free sealed lead-acid battery with gelled electrolyte: leak-proof - Adjustable (installable) input voltage range: 170 – 300 V Communication Means and Administration Tools: - Control Panel: multifunctional control and monitoring console with LCD display. - Sound Signal: Battery mode transition signal: special signal for battery discharge: delay setting capability. Environment: - Operating Range of Environmental Parameters: – 40°C - Operating Relative Humidity Range: – 95% - Operating Altitude Range: 0-3000 meters - Storage Temperature: -15 – 45°C - Relative Humidity during Storage: – 95% - Storage Altitude: 0-15000 meters - Acoustic Noise Level at 1 meter from the device surface: 45 dBA Compliance: - Compliance with Requirements: C-tick, CE, GOST, SABS, VDE.