UPS APC Smart-UPS SRT 10000VA

```html Graphic LCD Display Text and mnemonic diagrams displaying operating modes, system parameters, and alarm signals. Connection 10/100 BaseT The availability of detailed information on battery runtime, load level, and technical condition indicators facilitates timely replacement, reducing the risk of downtime. Energy-saving mode of the UPS, protected by a patent application When quality power is supplied from the external network, the UPS operates in a mode that consumes less energy (by not utilizing some internal modules), enhancing its energy efficiency without compromising the quality of protection for connected equipment. Battery failure notification Advance notification of impending battery failure allows for timely preventive maintenance. Automatic internal bypass In case of overload or UPS failure, the load is switched to power from the electrical network. Scalability of battery runtime If necessary, it allows for a quick increase in backup time. Intelligent battery management Maximizes battery efficiency, extends its lifespan, and enhances reliability through precise intelligent charging. Battery replacement during UPS operation Ensures that protected equipment receives clean sine wave power during battery replacement. Automatic restart of connected loads after UPS shutdown Automatically starts connected equipment after network power is restored. Battery charging with temperature compensation Extends battery life by adjusting the charging voltage according to battery temperature. UPS management via local network Allows remote management of the UPS over the network. Compatible with InfraStruXure Manager Enables centralized management using APC InfraStruXure Manager. SmartSlot connector The use of control cards allows modification of the UPS's capabilities. LED status indicators Visual indicators quickly provide an overview of the device and power status. Connection via serial port Management of the UPS through the serial port. External batteries connected via Plug-and-Play Ensures protected equipment receives sine wave power during the connection of additional batteries to the UPS. Converted between tower/chassis configurations for installation in equipment racks Protects initial investments in the UPS when transitioning from a vertical UPS to rack-mounted UPS. Hot-swappable battery replacement Possibility of connecting an external battery pack Management Communication interface with PC RS-232/RJ-45/SmartSlot Specifications UPS Type: Double Conversion (on-line) Application: For home, for computer Output Power Volt-amperes: 10000 VA Watts: 10000 W Input Network Parameters Nominal Voltage: 230/400 V (3 phases) Minimum Voltage (for operation from 220V network): 160 V Maximum Voltage (for operation from 220V network): 275 V Frequency: 50/60 Hz Frequency Deviation Range: ± 20% (10 Hz) Output Parameters Nominal Voltage: 230 V (± 3%) Frequency: 50/60 Hz (± 3 Hz) Efficiency at Full Load: 94.6% (at 50% load: 95%) Transfer Time: ms (continuous) Battery Parameters DC Voltage: 96 V (8x 12 V) Charging Time: 1.5 hours Runtime at Max Load: 3.8 min. (at 50% load: 11.5 minutes) Ability to connect additional batteries: + (up to two sets) Filtering and Protection Wired (computer) network protection: + (RJ-45) Telephone line protection: + (RJ-45) Surge suppression: 480 J Overload protection: + Overvoltage protection: + Battery deep discharge protection: + Connectors PC connection interface: USB SmartSlot: 1 pc. Input Connectors: Hard Wire 3 wire (1PH+N+G), Hard Wire 5-wire (3PH+N+G), RJ-45 Output Connectors: (1) Hard Wire 3-wire (HN + G), (6) IEC 320-C13, (4) IEC 320-C19, (3) IEC Jumpers, RJ-45 Physical Characteristics Width: 263 mm Height: 432 mm Depth: 715 mm Weight: 111.82 kg (gross: 126.82 kg) Additional Characteristics Topology: Double Conversion (Peak Factor 03:01) Bypass: Internal (with automatic or manual activation) Battery Type: Sealed lead-acid battery, maintenance-free, with gelled electrolyte: leak-proof Emergency Power Off (EPO) Voltage waveform type: Pure sine wave Operation Variable (set) input voltage range: 100-275 V (50% load) - at 230 V / 173-476 V (50% load) – at 400 V Control Panel: Multifunctional control and management console with LCD display Audible and visual signals with a priority system based on the severity of the event Operating range of environmental parameters: 0-40°C Operating range of relative humidity: 0-95% Operating altitude range: 0-3000 meters Storage temperature: -15...+45°C Relative humidity during storage: 0-95% Storage altitude: 0-15000 meters Acoustic noise level at a distance of 1 meter from the device surface: 55.00 dB(A) Heat dissipation in network operation mode: 1497.00 BTU/hour Protection class: IP 20 Package includes: UPS Power cord Software CD Documentation CD Installation guide Temperature sensor USB cable Web/SNMP Management Card ```